Industry

Oil & Gas

Keeping process and utility equipment ready for service starts with the right components. Shafttech supports replacement enquiries for transfer pumps, compressor drives, mixers, cooling systems and plant handling equipment across oil, gas and petrochemical facilities. Planning a turnaround or reviewing a costly spare? Compare component options on technical suitability, installation scope, price and delivery against your maintenance schedule.

Request A Quote

Where Our Components Fit in Your Plant

From feed transfer to cooling water and product handling, different duties place different demands on the drive. We review the equipment and service conditions before recommending a component.

  • Offshore oil platform

    Refinery and Petrochemical Process Units

    Reliable components for drilling, production and wellhead systems.

  • Oil and gas pipelines

    Oil Terminals and Transfer Facilities

    Precision motion and drive components for pipelines, compression and pumping systems.

    Components

  • Refinery columns

    Gas Processing and Compression

    Compressor-drive coupling selection depends on steady and transient loads, speed, balance and stiffness. High-speed or critical duties may require a rotor-dynamic review and project-specific documentation.

  • Pumps in a plant utility room

    Cooling Water and Plant Utilities

    Components for continuous and reliable operation of critical rotating equipment.

  • Pressure gauge and valves on process piping

    Petrochemical Product Handling

    Conveyors and bagging or packaging auxiliaries may use gearboxes, roller chains, sprockets and overload protection. MAYR torque limiters, clutches or brakes are assessed against the actual mechanism and stopping duty.

Manage Overload, Stopping and Holding

Solutions across oil and gas.

  • Flange coupling

    Explore an ESCO Alternative

    • Before you reorder, assess ESCO alternatives for selected Flender, KTR, John Crane Metastream, Rexnord Thomas and Addax coupling applications.
    • For refinery process pumps, terminal transfer pumps and petrochemical mixer or compressor drives, we review torque, speed, shaft connections, misalignment and installation space against the operating duty.
  • Industrial pump set

    KSB, Sulzer and Tsurumi Pump Enquiries

    • For KSB or Sulzer process and utility pump sets, send the installed coupling details.
    • For Tsurumi dewatering or wastewater pumps, send the model and drive arrangement first: many submersible designs do not use an external motor-to-pump coupling. We assess coupling options only where the arrangement is suitable.
  • Torque limiter

    Torque Limiters

    • Jams in product-handling conveyors or packaging auxiliaries can overload the drive. MAYR torque limiters limit transmitted torque or disconnect at the set threshold, depending on the selected design.
    • We review operating torque, overload setting, speed, re-engagement behaviour and monitoring requirements.
  • Clutch and brake unit

    Clutches and Brakes

    • For plant handling and auxiliary machinery, MAYR clutches control drive engagement. Brakes are selected for the mechanism’s stopping or holding duty, including any required response to loss of power.
    • Tell us the torque, speed, duty cycle and required behaviour on loss of power. For brakes, specify holding, service stopping or emergency stopping.
  • Roller chain

    Roller Chains and Sprockets

    • Shafttech supplies MTM and Renold roller chains and sprockets for chain-driven conveyors, bagging lines and handling auxiliaries in petrochemical plants.
    • For replacement or new-drive enquiries, we review chain standard, pitch, strands, tooth counts, speed ratio, bore and keyway details, power, loading and lubrication requirements.
    • Send the chain designation and sprocket details. If markings are missing, photographs and measurements can help establish the requirements.

Have a part you need to replace?

Send Us a Photo, Part Number or Drawing

Oil & Gas Components for Drives, Conveying and Rotating Equipment

The mechanical components oil and gas depends on.

Our Key Brands for Oil & Gas Applications

Help Us Identify the Right Component

A clear description of the application helps us assess more than the part’s external dimensions.

Where available, include:

  • Equipment make, model and nameplate photos.
  • Component brand, part number and markings.
  • Photographs showing the component and its installation.
  • Drawings, dimensions and quantity required.
  • Operating speed, load or power information.
  • Details of wear, damage or recurring failure.
  • Required delivery date or planned shutdown window.

You do not need every detail to start an enquiry.

Send what you have, and our team will advise what else is needed.

Frequently Asked Questions

A gearbox nameplate, a bearing being measured, a gearbox, a shaft drawing and an opened gearbox

Sourcing

Send Us Your Oil & Gas Requirement

Whether you need a replacement component, a repair assessment or a fabricated part, send us the details of your equipment and the work required.

Tell Us What You Need

Optional
Upload a photo or drawingJPG, PNG, PDF or CAD, up to 10MB each

An engineer will reply with pricing and lead time. No account needed.

By sending this, you agree to our Privacy Policy.